Skip to main content
This page is for the person at the print station.

Find the product

Use the search box at the top. You can:
  • Type part of the name, the SKU or the GTIN.
  • Scan the product’s barcode with a USB barcode scanner. The scanner works from anywhere on the screen, and an exact match opens straight away.
  • Type a work order number, if your company uses work orders. See Work orders.
  • Browse. Click Browse all products for the full list from A to Z.
Each result shows the product’s name, its code and how many sizes it has. Click one to select it.
Typing in the search box needs a keyboard or a scanner. The app has an on-screen keypad for the station code and a keyboard for Wi-Fi passwords, but not for searching.

Check the label

The middle of the screen shows the label as it will print. Use Fit to see the whole label or 1:1 to see it at real size. The panel on the right shows the product with two status chips: Under On the label you see what this label will show: composition, origin, care and barcode.

Choose the size and quantity

1

Pick the colour and size

Tap the colour and the size under Colour and Size.
2

Set how many

Under How many?, use − and +, or tap 1, 5, 10, 25 or 50. The station remembers your last quantity.
3

Print

Click the Print button at the bottom. It shows the number of labels, the product and the size.
A job can have up to 500 labels.

Several sizes at once

To print a size run in one go, click Several sizes or colours at once….
  • Set a quantity for each colour and size. Rows left at 0 are skipped.
  • Same quantity for all sizes fills every row with one number.
  • Reset to 0 clears them.
Each size prints with its own QR code. Click Print when the total is right.

Use a different label

If your company has more than one active label, Change template appears above the preview. Click it and pick the label to print.
  • This station’s label marks the station’s usual label.
  • Different size - check the printer media warns that the label is a different size from the usual one. Make sure the right labels are loaded in the printer.
The station goes back to its usual label after 10 minutes without use, or when you click Back to this station’s label.

While it prints

The screen shows progress, such as “Printing 12 of 50”, and the time left.
  • Pause and Resume hold and continue the job.
  • Cancel remaining stops it.
Both take effect after the label that is currently printing.

When it is done

You see how many labels were printed, and three choices:
  • Search another product
  • Print the same again
  • Reprint one label, for a label that came out damaged
The screen returns to search by itself after 10 seconds.

If the printer stops

A banner says “The printer stopped”, with the reason and how many labels are left. Fix the problem at the printer, then click Resume, or Cancel job.

When the internet is down

Printing carries on. The station keeps its own copy of your products and labels. A red banner says “Luxima is not reachable - check the network. Printing still works from this computer’s copy.” It also shows how many days are left before the station must connect again.
  • Labels printed offline are recorded in LUXIMA when the station is back online.
  • A station can stay offline for a limited number of days, 7 unless LUXIMA set it differently. After that, printing stops until it connects once.

Messages on the search screen